• Concentrates: Mix  bottle of OdorZyme with the described quantity of water listed on the bottle to provide the ready to use amount you ordered. For best results, DO NOT OVER DILUTE! Note: You may dilute a stronger solution of OdorZyme if the stain problem is older or the odor is extremely strong. Apply with a clean household or pump sprayer. (Be sure there are NO chemical or soap residue left in the sprayer from previous use.) Shake well! Some settling may occur if the bottle is left stationary for long periods of time.
• OdorZyme is safe to use around pets and people but is not designed for topical use. NEVER spray directly on pets or people!

• Check fabrics for colorfastness in an inconspicuous area. OdorZyme is designed to be safe on any water-safe surface, but we always recommend you test an area first!

• Use OdorZyme first! DO NOT mix or use other cleaners or chemicals at the same time as OdorZyme - this will reduce its effectiveness!  For best results, if other soaps or chemicals have already been used,  rinse repeatedly to remove all traces and allow to dry completely before using OdorZyme!

• OdorZyme must come in contact with all urine deposits on the surface as well as under the surface. Urine will also travel and spread in areas like carpet, bedding and other absorbing materials.  Different problems will require different techniques.

• It is best to SATURATE the affected areas with OdorZyme so that it comes in contact with the urine. OdorZyme must remain wet  long enough for the bio-enzymes to complete their work on the urine crystals. The more absorbent the material, the more OdorZyme will be needed.

• If urine deposits are heavy, very old, or other urine odor/stain products have been used, more than one OdorZyme treatment may be required. 

Carpet & Rugs

OdorZyme coverage area: This will depend on how big the problem area, thickness of the carpet and pad. It is important to SATURATE the affected areas) through the carpet, pad and the sub floor! If the area is the size of a baseball we recommend SATURATING with OdorZyme the size of a basketball in order to reach all the urine deposits that may have traveled below the surface.

1.First, identify the areas) to be treated and estimate amount of urine deposited. (Single occurrence vs. repeated soiling).

2.For new urine deposits, soak up as much of the urine liquid as possible. An absorbent material such as wadded paper towel is both effective and disposable.

3.Test materials for colorfastness. Although safe for use on the most common carpeting materials, it is recommended that you test an inconspicuous area first. Should you have any doubt, discontinue use and consult the carpet/rug manufacturer or carpet cleaning professional.

4. Mix each 4oz bottle of OdorZyme with the described quantity of water listed on the bottle to provide the ready to use amount you ordered! Note: You may dilute stronger solution if the odor and stain problem is older or extremely strong.

5. Saturate contaminated area thoroughly with OdorZyme . For best results, the OdorZyme bacterial enzymes must come into contact with the contaminants in order to completely digest the source of the offending urine odors. Use enough product to penetrate the carpet, carpet backing, padding through to the sub-flooring (i.e. plywood/OSB/concrete).

6. Allow OdorZyme to air dry. As a bio-based product, bacterial cultures need to stay in a moist environment in order to reproduce, multiply and consume contaminants. After OdorZyme is completely dry and all odor has been eliminated, you may rinse with clean water or clean the area to remove any residue and to help prevent future resoiling of the area.

7. Repeat as necessary. Since uric acid crystals can build-up in layers over time, it may be necessary to repeat the procedures listed above until all stains and odors are removed.

Note: Urine odors may intensify with the initial application. This is a sign that the urine deposits are "lifting" and being broken apart by the bio-enzymatic action.

Use OdorZyme on urine affected areas before shampooing or professional carpet cleaning. "Wet" process carpet cleaning machinery and procedures may result in spreading the odor causing materials (uric acid crystals) over a wider area, making cleanup more difficult.

On heavily saturated areas or difficult stains, treat and cover area in plastic (a plastic garbage bag will do the job). This will help retain moisture, extending the working "life cycle" of the bacterial cultures.

When replacing old carpeting, treat the entire sub floor (i.e. plywood/OSB/concrete) with OdorZyme after the old carpeting is removed. This will eliminate any urine odors that may have been previously inaccessible.

* Special Note: Older "set" stains may not lift completely due to acidic "etching". Unfortunately, prolonged exposure to uric acid may actually "burn" carpet fibers beyond repair. If this has happened, nothing will remove the damaged area.

Back to top  Have Questions: email us at info@Odor-Solutions.com

OdorZyme used sparingly, is an excellent tool for removing urine odors from the cracks and crevices of wood flooring. As a general guideline, OdorZyme may be used on any water-safe and properly sealed wood flooring material. If you are unsure, please consult the wood-flooring manufacturer.

Directions for use:

1.Identify the area to be treated.

2.For new deposits, soak up as much of the liquid as possible. An absorbent material such as wadded paper towel is both effective and disposable.

3.Mix each 4oz bottle of OdorZyme with the described quantity of water listed on the bottle to provide the ready to use amount you ordered! Note: You may dilute stronger solution if the odor and stain problem is older or extremely strong.

4.Use OdorZyme sparingly to cover the affected area. We do not recommend complete saturation as the moisture may damage the wood or adhesives. In the case of wood flooring, it is better to repeat the procedure several times than to introduce too much moisture.

5. Allow to air dry. As a bio-based product, bacterial cultures need to stay in a moist environment in order to reproduce, multiply and consume contaminants. After OdorZyme is completely dry and all odor has been eliminated, you may rinse with clean water or clean the area to remove any residue and to help prevent future resoiling of the area.

Note: Urine odors may intensify with the initial application. This is a sign that the urine deposits are "lifting" and being broken apart by the bio-enzymatic action.

For heavily saturated areas or difficult stains, treat with OdorZyme and cover area in plastic (a plastic garbage bag will do the job) for no longer than one hour. This will help extend the working "life cycle" of OdorZyme bacterial cultures.

Back to top   Have Questions: email us at info@Odor-Solutions.com

Due to their large size and construction methods, successful removal of urine stains and odors can be troublesome. However, following the guidelines below helps increase your chances of success.

Traditional Spring Construction Mattresses

Directions for use:

1. First, identify the areas) to be treated and estimate amount of urine deposited. (Single occurrence vs. repeated soiling).

2. For new deposits, soak up as much of the liquid as possible. An absorbent material such as wadded paper towel is both effective and disposable.

3. Test materials for colorfastness. Although OdorZyme is safe for use on the most common fabrics, it is recommended that you test OdorZyme in an inconspicuous area first. Should you have any doubt, discontinue use and consult the mattress manufacturer.

4. Mix each 4oz bottle of OdorZyme with the described quantity of water listed on the bottle to provide the ready to use amount you ordered! Note: You may dilute stronger solution if the odor and stain problem is older or extremely strong.

5. Saturate contaminated area thoroughly with OdorZyme. For best results, the bacterial enzymes must come into contact with the contaminants in order to completely digest the source of the offending odors. Use enough product to penetrate the fabric surface through to multiple layers of padding, to the spring coils and finally to the opposite side (depending on how much urine was deposited).

6. Flip mattress (if necessary) and repeat procedure from opposite side with OdorZyme .

7. It may be beneficial to keep the treated area moist by covering affected area with plastic (a plastic garbage bag will do the job). As a bio-based product, bacterial cultures need to stay in a moist environment in order to reproduce, multiply and consume contaminants. Covering with plastic will help retain OdorZyme moisture, extending the working "life cycle" of the bacterial cultures.

8. Allow OdorZyme to air dry. As a bio-based product, bacterial cultures need to stay in a moist environment in order to reproduce, multiply and consume contaminants. After completely dry and all odor has been eliminated, you may rinse with clean water or clean the area to remove any residue and to help prevent future resoiling of the area.

9. Repeat with OdorZyme as necessary. Due to the inaccessible "hollow" construction of traditional mattresses, it may be necessary to repeat the procedures listed above until all stains and odors are removed.

Note: Urine odors may intensify with the initial application. This is a sign that the urine deposits are "lifting" and being broken apart by the bio-enzymatic action.

Use on affected areas before professional upholstery cleaning. "Wet" process cleaning machinery and procedures may result in spreading the odor causing materials (uric acid crystals) over a wider area, making clean up more difficult.

Special Note: Older "set" stains may not lift completely due to acidic "etching" of the mattress fabric. Unfortunately, prolonged exposure to uric acid may actually "burn" fibers beyond repair.

Foam Construction Mattresses

Directions for use:

1. First, identify the areas) to be treated and estimate amount of urine deposited. (Single occurrence vs. repeated soiling).

2. For new deposits, soak up as much of the liquid as possible. An absorbent material such as wadded paper towel is both effective and disposable.

3. Test materials for colorfastness. Although safe for use on the most common fabrics (such as vinyl and nylon found on hospital mattresses), it is recommended that you test an inconspicuous area first. Should you have any doubt, discontinue use and consult the mattress manufacturer.

4. Mix each 4oz bottle of OdorZyme with the described quantity of water listed on the bottle to provide the ready to use amount you ordered! Note: You may dilute stronger solution if the odor and stain problem is older or extremely strong.

5. Saturate contaminated area with OdorZyme thoroughly. For best results, the bacterial enzymes must come into contact with the contaminants in order to completely digest the source of the offending odors. Use enough product to penetrate the surface fabric through to foam cushion material.

6. Allow OdorZyme to air dry. As a bio-based product, bacterial cultures need to stay in a moist environment in order to reproduce, multiply and consume contaminants. After completely dry and all odor has been eliminated, you may rinse with clean water or clean the area to remove any residue and to help prevent future resoiling of the area.

7. Repeat as necessary.

Note: Urine odors may intensify with the initial application. This is a sign that the urine deposits are "lifting" and being broken apart by the bio-enzymatic action.

Back to top   Have Questions: email us at info@Odor-Solutions.com

Due to the absorbent nature of furniture and upholstery cushions, urine contamination on these surfaces can be especially troublesome. However, by following the guidelines found below, stains and odors on these surfaces can be successfully removed.

 Directions for use:

1. First, identify the areas) to be treated and estimate amount of urine deposited. (Single occurrence vs. repeated soiling).

2. For new deposits, soak up as much of the liquid as possible. An absorbent material such as wadded paper towel is both effective and disposable.

3. Test materials for colorfastness. Although safe for use on the most common fabrics, it is recommended that you test an inconspicuous area first. Should you have any doubt, discontinue use and consult the furniture manufacturer or furniture cleaning professional.

4. Mix each 4oz bottle of OdorZyme with the described quantity of water listed on the bottle to provide the ready to use amount you ordered! Note: You may dilute stronger solution if the odor and stain problem is older or extremely strong.

5. Saturate contaminated area thoroughly with OdorZyme . Use enough product to penetrate the surface fabric and cushion material. For best results, the bacterial enzymes must come into contact with the contaminants in order to completely digest the source of the offending odors.

6. Allow to air dry. As a bio-based product, bacterial cultures need to stay in a moist environment in order to reproduce, multiply and consume contaminants. After completely dry and all odor has been eliminated, you may rinse with clean water or clean the area to remove any residue and to help prevent future resoiling of the area.

7. Repeat as necessary.

Note: Urine odors may intensify with the initial application. This is a sign that the urine deposits are "lifting" and being broken apart by the bio-enzymatic action.

Use on affected areas before professional cleaning. "Wet" process cleaning machinery (such as extractors) and procedures may result in spreading the odor causing materials (uric acid crystals) over a wider area, making clean up more difficult.

On heavily saturated areas or difficult stains, treat with OdorZyme and cover area in plastic (a plastic garbage bag will do the job). This will help retain moisture, extending the working "life cycle" of the bacterial cultures. Treat area and leave overnight.

If furniture cushions have removable covers, remove; treat fabric, and launder/dry clean as recommended. Treat exposed cushion material and allow to air dry. This procedure will eliminate any odors that may have been previously inaccessible.

Special Note: Older "set" stains may not lift completely due to acidic "etching". Unfortunately, prolonged exposure to uric acid may actually "burn" fabric fibers beyond repair.

Back to top   Have Questions: email us at info@Odor-Solutions.com

OdorZyme penetrating action works excellent on hard surface flooring such as concrete, linoleum, and tile & grout. The cleaning procedures for hard surface flooring are as follows:

Directions for use:

1.Identify the area to be treated.

2.For new deposits, soak up as much of the liquid as possible. An absorbent material such as wadded paper towel is both effective and disposable.

3.Mix each 4oz bottle of OdorZyme with the described quantity of water listed on the bottle to provide the ready to use amount you ordered! Note: You may dilute stronger solution if the odor and stain problem is older or extremely strong.

4.Use OdorZyme sparingly to cover the affected area. In the case of wood flooring, it is better to repeat the procedure several times than to introduce too much moisture.

5. Allow to air dry. As a bio-based product, bacterial cultures need to stay in a moist environment in order to reproduce, multiply and consume contaminants. After OdorZyme is completely dry and all odor has been eliminated, you may rinse with clean water or clean the area to remove any residue and to help prevent future resoiling of the area.

Note: Urine odors may intensify with the initial application. This is a sign that the urine deposits are "lifting" and being broken apart by the bio-enzymatic action.

For heavily saturated areas or difficult stains, treat with OdorZyme and cover area in plastic (a plastic garbage bag will do the job) for no longer than one hour. This will help extend the working "life cycle" of OdorZyme bacterial cultures.

Back to top   Have Questions: email us at info@Odor-Solutions.com